Mikado Logo 600 Manual de instrucciones descargar pdf (Pagina 15)

Manual The New Generation - ©Mikado Modellhubschrauber - Page 15

1x M3x18

1x M3







2x M3x14

2x 3x9x1

Apply a small

amount of

grease to

the contact

surface

Antenna tube

14 Mounting the Motor

Bag 1 • Bag 12

13 Rotor Head Assembly

Bag 7 • Bag 12

Bag 7

Bag 12

Installation of the Motor Pinion

Screw the motor pinion onto the motor shaft, making sure that

it can still be moved. Now mount the motor on the motor plate

and move the pinion so it is aligned well with the main gear.

As visual help for aligning the pinion you may use the small

ridge which separates the two parts of the pinion. When the

pinion is aligned correctly it will easily engage with the main

gear. If the pinion does not engage with the main gear, it is not

correctly aligned. After the pinion is correctly aligned, take the

motor out of the mainframe and tighten the set screw.

Gear Backlash

Move the motor with the pinion until it is limited by the gear.

Tighten one of the M3x14 screws slightly. You must still be able

to swivel the motor around its own axis. In this way you can

easily determine the correct distance between the main gear

and the pinion. There should be no (!) gear backlash. At the

same time, the motor should not (!) exert any pressure onto the

running surface of the main gear. After you have determined

the correct distance, tighten the second M2x14 screw.

Bag 1

Bag 12

available pinions for

module 0.5 diameter 5 mm

(not included in kit)

17 teeth* #4117

18 teeth* #4118

19 teeth* #4119

20 teeth* #4120

21 teeth* #4121

22 teeth* #4122

23 teeth* #4123

available pinions for

module 0.7 diameter 5 mm

(not included in kit)

12 teeth* #4212

13 teeth #4213

14 teeth #4214

15 teeth #4215

16 teeth #4216

17 teeth #4217

18 teeth #4218

19 teeth #4219

available pinions for

module 0.7 diameter 6 mm

(not included in kit)

15 teeth #4315

16 teeth #4316

17 teeth #4317

18 teeth #4318

*for max. to 6S LiPo

For very hard 3d ﬂying counterbearing

no. #4134 (5 mm) or #4148 (6 mm) should be

installed. Please goto page 28.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 27 28

Comentarios a estos manuales

Sin comentarios

Mikado Logo 600 Manual de instrucciones Pagina 15

Comentarios a estos manuales

Relacionado con productos y manuales para Juguetes y accesorios Mikado Logo 600